Premium Zirconia Flap Disc | 4.5" x 7/8-Inch, 60 Grit, Bevel Type #29

INGLAU Flap disc with Ceramic
»Extremely high material removal with little effort thanks to the self-sharpening ceramic grain.
»Excellent results for surface and edge grinding of steel and stainless steel. Ideal for extreme grinding jobs like processing high-alloy steels, titanium alloys, nickel-based alloys as well as chromium and chromium-nickel steels, brass and bronze thanks to high load capacity.
»Very high tool life; cool grinding on surfaces and edges
»Uniform grinding result, comfortable grinding with only low vibration
»Maximum working speed 80 m/s
»Tilted version: angle of attack 7-9°

INGLAU Flap disc with Zirconia Aluminum
»Specially shaped flap disc with lamellae that are rounded off towards the outer edges.
»Grinding media: Zirconia alumina
»Thanks to the special design it is particularly suited for processing fillet welds; making faster and more efficient processing possible; also suitable for surface grinding
»High material removal with very high tool life thanks to the use of zirconia alumina
»Suitable for processing stainless steel and steel
»Uniform grinding result, comfortable grinding with only low vibration
»Maximum working speed 80 m/s

INGLAU Flap disc with Aluminum
»Suitable for rough and intermediate grinding of steel, non-ferrous metals, wood and plastics
»High lamellar lining on fiberglass pad
»Uniform grinding capacity
»Cool grinding
»Low noise level
»Uniform grinding result, comfortable grinding with only low vibration
»Maximum working speed 80 m/s.